MDBT50Q系列模組已正式量產, 歡迎所有開發者與我們聯絡取得最新的資訊!
勁達國際電子(Raytac Corporation) 的MDBT50Q系列模組採用Nordic nRF52840, 全面支援藍牙5技術, Zigbee, Thread (IEEE 802.15.4), ANT, 和2.4GHz的多協定無線IoT解決方案!
以nRF52840架構為基礎所開發的MDBT50Q系列模組, 以Arm® Cortex M4F處理器為核心, 可支援浮點與DSP運算. 配備1MB Flash記憶體和256 kB RAM. 此外, MDBT50Q也提供一個全速的USB 2.0控制器的介面，並支援5.5V電源輸入, 方便物聯網應用裡日漸增加的USB或鋰電池供電需求!
MDBT50Q 尺寸為 10.5 x 15.5 x 2.0 (2.2)mm, 具備48 GPIO, 並提供3種不同天線款式（陶瓷天線, PCB天線, 與外接天線）供開發者選用, 相信會帶給開發者更多彈性的選擇以面對日益多樣化的物聯網產品需求.
同時, 隨著MDBT50Q模組的正式量產, 開發者也可以藉此有效簡化開發流程, 降低物料成本, 滿足長距離傳輸的需求並提供快速進入市場的優勢！
Raytac MDBT50Q (Nordic nRF52840) 系列模組全面支援藍牙5技術, Zigbee, Thread (IEEE 802.15.4), ANT, 和2.4GHz的多協定無線IoT解決方案!
模組模塊具備48 GPIO 及 SPI / UART / I2C / I2S / PMD / PWM / ADC / NFC / USB介面全面支援物聯網感應器或控制器等的硬體需求！
MDBT50Q & MDBT50Q-P 規格書下載 (請點我)
MDBT50Q-U (u.FL connector) 規格書下載 (請點我)
1. 方案：Nordic nRF52840
Part No.: MDBT50Q-1M
天線形式: 陶瓷天線
2. 方案：Nordic nRF52840
Part No.: MDBT50Q-P1M
天線形式: PCB天線
3. 方案：Nordic nRF52840
Part No.: MDBT50Q-1M
天線形式: u.FL Connector 外接天線
Features
‧Bluetooth 5, IEEE 802.15.4, 2.4 GHz transceiver
‧-95dBm sensitivity in 1Mbps Bluetooth low energy (BLE) mode
‧-103dBm sensitivity in 125Kbps BLE mode (long range)
‧+8 dBm TX power (down to -20 dBm in 4 dB steps)
‧On-air compatible with nRF52, nRF51, nRF24L and nRF24AP Series
‧Programmable output power from +8dBm to -20dB
‧RSSI (1dB resolution)
‧Supported data rates:
‧Bluetooth 5: 2 Mbps, 1 Mbps, 500 kbps, 125 kbps
‧IEEE 802.15.4-2006: 250 kbps
‧Proprietary 2.4 GHz: 2 Mbps, 1 Mbps
‧ARM Cortex –M4 32-bit processor with FPU, 64 MHz
‧Memory: 1MB flash / 256KB RAM‧HW accelerated security
‧ARM TrustZone Cryptocell 310 cryptographic accelerator
‧128 bit AES / ECB / CCM / AAR co-processor (on-the-fly packet encryption)
‧Advanced on-chip interfaces
‧USB 2.0 full speed (12Mbps) controller
‧QSPI 32MHz interface
‧High speed 32MHz SPI
‧Type 2 near field communication (NFC-A) tag with wake-on field
‧Programmable peripheral interconnect (PPI)
‧48 general purpose I/O pins (GPIO)
‧EasyDMA automated data transfer without CPU processing on peripherals
‧12 bit, 200ksps ADC – 8 configurable channels with programmable gain
‧4 x 4 channel pulse width modulator (PWM)units with EasyDMA
‧Audio peripherals : I2S, digital microphone interface (PDM)
‧5 X 32-bit timers with counter mode
‧Up to 4 x SPI masters / 3 x SPI slaves with EasyDMA
‧Up to 2 x I2C compatible 2-wire masters / slaves
‧2 x UART(CTS/RTS) with EasyDMA
‧Quadrature decoder (QDEC)
‧3 x 24-bit real-time counters (RTC)
‧Flexible power management
‧Supply voltage range 1.7V to 5.5V
‧Built in DC/DC converter for direct USB/Li-On power
‧On-chip DC/DC and LDO regulators with automated low current modes
‧Regulated supply for external components from 1.8V to 3.3V
‧Automated peripheral power management
‧Fast wake-up using 64MHz internal oscillator
‧0.4uA at 3V in OFF mode, no RAM retention
‧1.5uA at 3V in ON mode, no RAM retention, wake on RTC
‧ Nordic SoftDevice ready and with support for concurrent multi-protocol
‧ TX Power: 0dBm @ 5.3mA, +8dBm @ 13.6mA
‧ BLE RX Sensitivity: -96 dBm @ 5.4mA
‧ BLE Coded RX Sensitivity: -103 dBm
‧ Operation Temperature: -40℃ ~ 85℃
‧ Dimensions: 10.5 x 15.5 x 2.0 mm (2.2mm)
‧ Bluetooth 5 Qualified and Thread Compliant (Expected in Q3 2018)
‧ RF Certification Grant(Expected in Q3 2018)
‧FCC (USA)
‧IC (Canada)
‧MIC (Telec Japan)
‧KC (Korea)
‧SRRC (China)
‧NCC (Taiwan)
‧ RF Certification Compliance(Expected in Q3 2018)
‧CE (Europe)
‧RCM (Australia / New Zealand)
Application
- IoT Networks
- Smart Home Appliances
- Smart City Sensors
- Industrial IoT Sensors Controllers & Automation
- Personal Area Networks
- Health/Fitness Sensor & Monitor Device
- Medical Device
- Interactive Entertainment Devices
- Advanced Remote Controls
- Gaming Controller
- Advanced Personal Fitness Devices
- Health Device
- Virtual/Augmented Reality Applications
- High Performance HID Controllers
- Mesh Network Applications
- Home/Office/Hotel Automation
- Smart Energy Management
- Safety & Security
- Lighting Products
留言列表
